Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of Appliance5 - 10 years
Thomas From Bay Shore, NY
Sep 24, 2013
Tape off the light button so door alarm does not go off. Take off the clear light shield and remove the light bulbs. Be careful, bulbs may still be HOT!! With Phillips head screw driver unscrew the light plate assy. Drop it down in a comfortable position. Disconnect the connector, unscrew the thermal sensor and remove light assy. Install new light assy into light plate assy. There is no thermal senor in the new assy. Snap light plate assy back into place and install the two screws previously taken out. Install bulbs and clear cover. Remove tape from light door switches and you are done. Lights should go on and off when door buttons are pushed in and out.
|Part Photo||Part Description||Price||Availability
Part Number: PS3529355