Loads of various sizes were out of balance during the spin cycle. Had to adjust the wet clothes frequently.

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver

Don C. From Sedalia, MO

Sep 18, 2013

First unplugged washer. Found clips on front of machine and lifted the lid back. Took out two 5/16" screws and removed the front panel. Tilted back the washer slightly and took off the drive belt underneath. Started removing the 6 springs with visegrip pliers that support the tub. Then removed the hose on the back left, no pliers needed. Then used pliers to loosen the clip holding the drain hose on the bottom of tub. Moved the clip down, then took off hose. There will be water in the hose, be ready with towel. Watched the video for snubber installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Snubber Ring

Part Number: PS1792928

In Stock

Suspension Springs - Kit of 6

Part Number: PS2004049

In Stock

Drive Belt

Part Number: PS2018741

In Stock