Agitator was not spinning.

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

manish From Levittown, NY

Sep 17, 2013

Found some youtube videos that explained it well. Pop off fabric softener dispenser - it pops right off - no tools required. Look down the middle of the agitator and pull off round plastic piece - it has a couple of handles on it. Use socket nut to remove the bolt that holds 2 piece agitator to motor shaft. Slide off 2 piece agitator. Put on floor. Gently hold down agitator w/ your feet, don't stand on it but hold it down w/ your toes. Pull off top of agitator. This is when you will have access to the old cam kit which slides right off. Remove old thrust spacer. Replace w. new thrust spacer, attach new cam kit - it snaps into place. place top of agitator on bottom of agitator. Place the entire assemble back in the washer. Retighten bolt. Replace plastic cap. Pop Fabric dispenser back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Cam Kit

Part Number: PS334648

In Stock

Thrust Spacer

Part Number: PS350853

In Stock