Quit running after one to five minutes - consistently

ApplianceKenmore Dryer

Model110.85866400

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Walton From Leesburg, VA

Sep 14, 2013

Followed the repair tests followed in repairman's sheet found taped behind front lower panel. When into diagnostic mode (found on paper) and tested the top front control panel buttons. All checked out fine except when I opened the door it beeped and showed a 4E code. So per the paper Tested the Moisture sensors (two metal strips inside of dryer where lint screen is) test passed, only three things left for this issue per the manual. Wire harness from two metal strips, longer wires going up from that harness to electronic control board , and the ECB itself(found under top lid of dryer). Since did not have a meter, Replaced the lower wire harness first - no improvement. replaced ECB - works perfectly now. Saved $$$ vs a new dryer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Control Board

Part Number: PS973725

$269.27
Recycling Rebate Available
In Stock