CLOCK/OVEN DISPLAY DID NOT LIGHT UP

ApplianceJenn-Air Range

ModelSVD48600W

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Robert From Cambridge, NY

Mar 04, 2008

0 out of 2 people found this instruction helpful

I removed four screws holding the molding under the burner knobs on the front of the stove. I removed the four burner knobs and the screws next to each knob stem. I removed the tow screws under the triangular plastic end caps of the control panel and lifted the panel way from the front of the stove unplugging the two wire leads at the same time. I was able to replace the old clock display with the new one.
The new display lights up and works most of the time but occasionally the clock jumps to the wrong time and blinks. It is necessary to reset the clock.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Assembly (Now subbed to Electronic Clock Control Board)

Part Number: PS2077361

$314.75
Recycling Rebate Available
In Stock