Level of DifficultyA Bit Difficult
Time to do repair1- 2 hours
Age of Appliance5 - 10 years
Stephen T From Venice, FL
Mar 02, 2008
7 out of 8 people found this instruction helpful
Disconnected electrical power to the range.
Rmoved two burner cartridges. Removed 4 outer hexhead screws around outside metal frame. Removed 5 inner phillips screws holding the furner cartridge pans.Lifted the top metal frame away from the memebrane panel. Removed 4 hexhead screws under membrane panel to free membrane panel from range. Removed the 4 surface ontrol knobs. Remove 4 surface burner infinite control switches. Needed to use a 4 star point driver to remove 8 screws. Removed two hexhead screws holding the clock control element. Removed the bottom edge stripe from under the membrane panel 4 phillip head screws. Removed both left and right end caps from the membrane panel.
Reattached all components in reverse order onto the new membrane assembly.
Reinstalled new membrrane assembly. Reinstalled top metal frame and secured with appropriate screws. Reinstalled top burner cartridges and 4 control knobs.
Reconnected electrical power to the range.
Clock was illuminated. My wife tested all oven and broiler functions including time settings and cancel/off touch button.
As of now the range is working like new.
Before the membrane assembly was ordered, I researched this problem through the Repair Forum. Looked for similar problems from others.
Printed list of all stove fault codes for understanding. Printed parts list for the control panel section to identify all components.
Performed 2 dry runs in disassembling range top for understanding.
Actual repair time took about 2 hours.
Thank you for all the technical information to handle this repair.
|Part Photo||Part Description||Price||Availability
Part Number: PS2077524