Upper rack roller cracked then broke

ApplianceGeneral Electric Dishwasher

Model

Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Jeffrey From Wilson, NC

Mar 02, 2008

1 out of 2 people found this instruction helpful

First removed the end cover and clip on the end of the rack slide. Used a flat head screwdriver to push in the clip and carefully pried it out. Then using the same screwdriver, pried up on the rack roller clip attached to the dish rack. Once clip was free of the rack, slid the rack roller off through the front of the slider. Slid the new rack roller into the slider and snapped the roller clip onto the dish rack in the same place the old one was. Carefully twisted the plastic end cover and clip back onto the rack slider. Job complete. The trickest part of the job is removing the rack slider end cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 2955-0011 (Now subbed to WHEEL)

Part Number: PS5573993

$45.62
In Stock