Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark G - May 16, 2019
Verified Purchase
Easy repair
Order confirmation came with video of exact model install.
Well done and thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fridge and freezer were not getting cold. Clicking sound when compressor shutting off.
We noticed that items if the fridge portion of the refrigerator were starting to go bad before they should have and that the items in the freezer were not solidly frozen at times. I actually had two parts that needed to be replaced on my refrigerator, the relay assembly located near the compressor and the temperature control switch locat
... Read moreed in the freezer section. My fridge was making a clicking sound several months before it stopped working. I used the symptoms link on the website to help me locate what part might be the culprit and found the relay switch near the compressor bad and replaced it. A few days later we still had the same problem of both the fridge and freezer not being cold enough. Turns out the temperature controller in the freezer was just barely turning on when it would get warm enough in the freezer section. Once that part was replaced the refrigerator worked like new. It took me a while to find both problems since one was masked by the other but the website was a great help in finding both and getting the parts to fix everything.
Read less
Daniel from POPLAR BLUFF, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer temp control would not shut off
Took the old switch out and put in the new one.
David from Medford, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
21 of 86 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
January 23, 2019
Been having problems with my refrigerator. Replaced stop relay, overload switch and defrost thermostat switch. Freezer runs for a few hours then stops and takes forever to restart, fridge is warm when it does. I shut it off for a couple off days and when i turned it back on, the start relay didn't kick in until the thermostat control knob was at the coldest setting. What is up with this?
For model number GB2SHKXLQ00
Hello William, Thank you for the question. The next part to check is the Temperature Control, PartSelect Number PS11743518. This is the switch behind the knob. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 11, 2020
The temperature in the upper compartment of my fridge is not constant. I keep bottled water in the fridge, and every so often it completely freezes even though i haven't changed the temperature setting. When i do attempt to change the temperature setting it doesn't have any effect.The temperature control knob is "spongy" and doesn't distinctively stay on a particular setting. Could this be the problem, and how do i fix it.
For model number ARB1917CSR
Hi John,
Thank you for your question. The knob may be the issue. If you need to replace the knob, the part number for it is PS1631909. If the refrigerator is too cold, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the defrost thermostat, the damper belt, the center refrigerator crisper drawer slide rail, the defrost timer, the air damper/gear assembly, the evaporator fan blade and the temperature control. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pedro
December 9, 2021
even at warmest setting, freezer and refrigerator sections, the refrigerator section freezes
For model number arb2259cc
Hi Pedro,
Thank you for your question. If your refrigerator section is too cold, there are some parts that you will need to check to see which one is causing the issue. You will need to check the defrost thermostat, the defrost timer, the refrigerator temperature control thermostat and the air damper/gear assembly. We have included a link where you may reference information on how to test these parts. We hope this helps! Good luck with the repair!
I would like to know how to check a thermosat wp67003000 with a multimeter if it is good or bad meaning if i should replace it
For model number 596.67992600
Hi Serge, thank you for your question. This part should turn off at 0 degrees C and then turn on again when it reaches 10 degrees C. You can test if this part has continuity with your multi meter there by removing it from the appliance and using some ice water to manipulate the temperatures. Good luck with your repair.
Was this helpful?
Thank you for voting!
Jacqueline
November 4, 2022
I received a Whirlpool factory certified temperature control thermostat, with only to two prongs for the red wire and light blue wire. Where am I supposed to connect the green and yellow ground wire?
For model number Amana ARB2557CSR
Hi Jacqueline, thank you for reaching out. We have researched your model and attached a relevant video that might help you with your problem. We hope this is what you were looking for.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
