Burnt Smell

ApplianceGeneral Electric Range

ModelJBP90WS1

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Eugene From Hilton Head, SC

Feb 26, 2008

7 out of 13 people found this instruction helpful

Unplugged the Range and removed the two screws holding down the cook top. You do not need to remove the vent chamber at the rear of the range since the top lifts up about 4 inches. This should be enough room to get your hand onto the plug going to the door switch. Pull off the plug and remove the swich. Pop in the new one, put on the plug, reinstall the two screws and you are done!

Read the thread on "burnt smell" and DO NOT assume it is a burned out element. Follow your nose!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Oven Light Door Switch (Now subbed to SWITCH SPDT HIGH AMP)

Part Number: PS1765837

$7.97
In Stock