Dryer was making loud squeaking noises

ApplianceGeneral Electric Dryer


Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Bruce From Oklahoma City, OK

Feb 26, 2008

1 out of 1 people found this instruction helpful

Loosen the front of the chassis with two screws in at the top after removing the tip of the chassis. The plastic top bearing around the dryer drum, drum slides affixed to that bearing had worn out. I ordered the parts along with a bearing kit for the center rear of the drum. All were easily replaced once the parts arrived (the next day from ordering!). I also replaced the felt around the front of the drum which was worn. Finally, I 'greased' the idler pulley close to the motor and reassembled all. It works like a champ!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tine Pivot Clip (Now subbed to Tinerow Clip)

Part Number: PS393039

In Stock