LATCH ASSEMBLY WAS BROKEN

ApplianceMaytag Dishwasher

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers
Socket set

Ken From West Chester, PA

Feb 24, 2008

0 out of 1 people found this instruction helpful

1.TURN OFF POWER OR YOU COULD GET A TINGLE LIKE I DID. 2 SEPERATE THE INSIDE DOOR FROM THE OUTSIDE BY REMOVING THE SCREWS. 3 THERE ARE SMALL PLASTIC TABS HOLDING THE WIRE LEADS ONTO THE OLD LATCH HANDLE. 4 REMOVE THESE LEADS AND REPEAT THE SAME WITH THE REPLACEMENT PART. 5 PUT NEW LATCH HANDLE IN PLACE AND REATTACH THE WIRE LEADS MAKING SURE THE TABS HOLD THEM IN PLACE. 6 SEAL THE INSIDE AND OUTSIDE DOOR(S) WITH THE SCREWS AND TURN POWER BACK ON.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL W10130694 (Now subbed to Door Handle and Latch Assembly with Switches)

Part Number: PS2180046

$26.31
In Stock