Original Elememt went bad

ApplianceFrigidaire Range

ModelFEF366

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Steve From Orefield, PA

Feb 23, 2008

1 out of 1 people found this instruction helpful

The directions have been stated many time and they are quite simple. Take out the two screws, pull the element so the wire connections come through into the oven. Disconnect the element at the wire connectors and replace. This is a dirt easy job.

The only real area for a potential problem is pulling the wire connectors through into the oven. As long as you pull slow and from the back - right next to the whole, you will be fine. Take the connectors off carefully and you're golden. Easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - terminal depth of 13 inches (Now subbed to Bake Element - Push On Terminals - 240V)

Part Number: PS2332301

$29.16
In Stock