Key Pad was worn so you couldn't read the labels on Keys

ApplianceKitchenAid Dishwasher


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Gordon From Memphis, TN

Jun 02, 2013

1. Remove Torx screws all around edge of door. Front and back sections of door will separate just enough to allow repair. 2. Pop the center latch assembly out of the control panel. It has a clip on either side. 3. Remove the wires clipped into the various wire harnesses on the right. Take a photo with your cellphone to make sure you put them back in the correct places. There's really only one way they can go, so it's not hard. 4. Slide control panel out of dishwasher. 5. With a small flathead screwdriver, depress the clips that hold in the two printed circuit boards. Remove them. 6. Install circuit boards in the new control panel. 7. Install the new control panel as the old one, reattach the latch, then replace screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel

Part Number: PS887836

In Stock