When filling the washer Water ran out of it and flooded the floor.

ApplianceFrigidaire Washer


Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set
Wrench set

Sheri From Wrightsville, PA

May 28, 2013

Remove the agitator and the 2 bolts that clamp the spin drum to the shaft and pull up on drum the 2 seals are on the shaft right there. Pry up on the seals to remove them. Install all seals and Be sure to completely clean all parts before putting them back in the machine and re assemble the machine. The bad part of this job is if you have used powdered soap it took 3 hours to clean the parts before reassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tub Seal Assembly

Part Number: PS459481

In Stock