Bad Water pump

ApplianceMaytag Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers
Screw drivers
Socket set

Robert From bridgeton, NJ

May 24, 2013

Tilt washer back and pop belt on bottom of washer. Use putty knife to open top of washer 2 clips 2 inches in from both sides. Use racket to open and remove front panel of washer. use racket to remove 3 screws that hold pump to base of washer. pliers to remove clamps for intake and output hoses. use small bucket to catch water in hoses and pump. Replace pump unit, put screws in, put pump clamps on, put front panel back on , snap down top of unit, put belt back on pulleys and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump with Pulley

Part Number: PS2347187

$44.48
In Stock