Washer would not stop filling, and overflowed - Intermittent Problem

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Norman From Chittenango, NY

May 24, 2013

I found the part at PartSelect. I unplugged the power, turned off the water and removed the hoses from the back of the machine. I removed the front loader door by removing the philips head screws on the door hinge. I removed the philips head screws on the frame opposite the hinges. I removed the front. I then took the 4 philips head screws out of the detergent/softener dispenser on the top, and removed those parts. After this, I lifted the lid. At the back of the machine was the blue hot/cold water valve. I loosened the hose clamp with a nut driver on the thermister end, and removed the hose. I then removed the mounting bolt with a nut driver. I installed the new part reversing the order given above.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Thermistor

Part Number: PS2021369

On Order