Loud howling noise

ApplianceMaytag Dryer

ModelPDET910AYW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Bradshaw From Gardendale, AL

May 24, 2013

out of people found this instruction helpful

First thing I had to do was get the dryer into the garage, I needed some room to work. Then I removed the top and let it rest on the side so I didn't have to disconnect any wiring. Then I removed the door switch. Then I removed the front of the dryer. The belt came off easily by just wiggling it towards the back of the drum, then the drum came right out, towards the front. I used the snap ring pliers to remove the drum rollers and installed the new ones. I used regular pliers to remove the tensioner spring and and wrench and socket ratchet to remove the tensioner. Getting the spring on the new tensioner was the hardest part. I replaced the drum with the belt already around it then laid down to route it around the tensioner. You can rotate the drum by hand to make sure any strange noises are gone. If so simply replace everything after a good lint cleaning session, lint can cause fire, and you're good to go. Really easy stuff.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller

Part Number: PS2039408

$7.64
In Stock

Drum Glide

Part Number: PS2039613

$3.91
In Stock

Multi-Rib Belt

Part Number: PS2041323

$13.22
In Stock