washer would not start due to the failure of the switch

ApplianceRoper Washer

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

PAUL From FORT LAUDERDALE, FL

May 13, 2013

Had to remove the control panel and the back of the machine to get to the leads for the switch. Then installed the switch, but had to move the ground wite to the back of the machine because I could not get to the ground screw in the top of the machine. I just added it to an existing ground wire screwed to the back. Everything worked fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock