Several buttons on key pad did not respond.

ApplianceAmana Oven / Microwave Combo

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Screw drivers

R. J. From Tampa, FL

May 13, 2013

1. Unplug power cord. 2. Remove screws holding cover in place. NOTE: The two screws on the back bottom covers have "tamper-proof" heads. If no appropriate screwdriver is available, the pin can be broken by a using a flat blade screwdriver and hammer. With the pin removed, a star bit or even an allen wrench can be used to remove the screws. 4. Remove the connectors from the control module. 5. Remove the control module and housing. 6. If not done in 4., disconnect the ribbon cable from the main board. 7. Remove the circuit board from the housing. Peel the old membrane keypad off the housing. Be sure to clean off all glue residue. 8. Remove the adhesive cover on the center part of the new keypad and CAREFULLY put it in place. You will not be able to remove it once in place so it is imperative to get it placed right the 1st time. 8. Lift the edge of the membrane and peel the cover of the adhesive around the edge. Press lightly. 9. Re-assemble in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

SWTCH-MEMB

Part Number: PS2166910

No Longer Available