Broiler had no heat

ApplianceMaytag Oven

ModelMER6772BAB

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Donald From West Chester, PA

May 11, 2013

Turned off the power. Loosened the screws holding the element in place to be sure they would come loose easily. Removed the screws from the ceiling bracket and then the screws holding the element to the back. Pulled the element out and brought the wires out 8 inches or so. Removed the wire clips from the old element and set the old element aside. Attached the wire clips to the new element and pushed the wires back into the oven compartment until the brackets touched the back wall. Started the screws in the back brackets and then started the screws in the ceiling bracket. (these were a little trickly to line up). Tightened all screws, turned on the power and checked that the new element worked which it did.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Broil Element - Push On Terminals

Part Number: PS2342087

$36.57
In Stock