Average Repair Rating: 2.5 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replace ignition electrodes for GE gas stove
You need to remove the knobs and remove the panel where the knobs are connected.
You also need to remove the display panel front to gain access to the where the electrode wires attach.
The other screws are readily visible. It's about 30 screws that need to be pulled.
The adapter put on the electrode can be
... Read more pulled off with needle nose pliers and a small screwdriver, if the adapter does not fit through the opening on your stove. Just put the adapter back on after you snake the wires through.
I ordered the part I needed I recirived it overnite by 9 am. I installed it in 20 min iwould have taken 5 min but the part was of such high quality I had to use a drill to make the opening slightly larger, very easy.the part I received was twice the quality of the original part. Thank You
PAUL R. from BOSTON, MA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
8 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carl
September 27, 2019
When i turn knob to light burner the igniter clicks and lights burner on 3 knobs, but one knob does not. How do i get the one knob to get the igniter to click?
For model number AGBS300EP4WW
Hi Carl, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
March 1, 2022
I bought 2 Spark Electrode top WB18X26988 recently. The problem I have is they did not come with any installation instructions.
For model number JGBS20WEA1WW
Hello Tom, Thank you for the question. here is a repair story from a previous customer. "You need to remove the knobs and remove the panel where the knobs are connected.
You also need to remove the display panel front to gain access to the where the electrode wires attach.
The other screws are readily visible. It's about 30 screws that need to be pulled.
The adapter put on the electrode can be pulled off with needle nose pliers and a small screwdriver, if the adapter does not fit through the opening on your stove. Just put the adapter back on after you snake the wires through." We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Yibibng
March 17, 2022
After turn on the right rear knob, it clicking but not light. I can light it with lighter. What is the part I need to buy.
For model number RGB526-ET4WH
Hello Yibibng, thank you for writing. The part you will need is the SPARK ELECTRODE TOP PS11762477. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Rusty
July 16, 2023
Stove does not light when I turn the gas on. Is it just the ignitor that needs to be replaced?
For model number AGBS300EP2BB
Hi Rusty, thank you for getting in touch. If you hear clicking and see sparks as you turn the burner knob, and can smell that gas is flowing okay, but the fire will not ignite, it is possible that the gas feed is clogged. If it checks fine, we recommend replacing the igniter, part number PS11762477. Good luck with the repair!
Was this helpful?
Thank you for voting!
Chester
October 22, 2019
My gas stove igniter on the left side keeps clicking, after lighting the gas and after turning off as well. Is it just needing a new spark electrode? Or other potential parts as well?
For model number JGBP26WEW1WW
Hello Chester, thank you for your question. You will want to consider the Round Style Oven Igniter, part number PS243425 for your model range as the culprit of the clicking noise. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
