Injection hose developed small pin hole

ApplianceMaytag Washer

ModelA112

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Keith From Lorena, TX

Feb 19, 2008

15 out of 19 people found this instruction helpful

Removed the two bottom screws holding on the front panel and removed panel. Removed two screws holding on the top lid and removed lid. Loosened clamp on injection hose at water valve and pulled hose from valve. Twisted other end of injection line counter-clockwise to loosen from tub and removed line. Installed new line in reverse order, but left off front cover to watch for leaks. Ran washer while watching through opening in front. When I confirmed no leaks, then replaced front cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 206680 (Now subbed to Injector Hose with Air Gap)

Part Number: PS2017345

$44.21
In Stock