door boot seal was all milldew

ApplianceMaytag Washer

Modelmah4000aww

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

gary From tecumseh, MI

Jul 24, 2007

8 out of 13 people found this instruction helpful

Unpluged washer. Removed screws from front and removed door. Removed one more screw on each side and was able to remove front panel, and also lift the top. The boot seal was held in place with a wire and a spring. I unhooked the spring and removed the wire and then removed the old boot seal. I then proceeded to reverse the steps to put it all back together. It took me almost 4 hours. I also used the picture on your web sight to see how things were put together. It really helped a lot.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 12002533 (Now subbed to Bellow)

Part Number: PS2003890

$49.50
In Stock