Jammed gas valve , bad fan switch, and corroded ignitors

ApplianceJenn-Air Range

Model

Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers
Wrench(Adjustable)

Richard From Scotch Plains, NJ

Feb 16, 2008

12 out of 29 people found this instruction helpful

Turned off the gas valve and disconected the gas line from the stove-top. Removed the stove top and disassembled the unit, to access the bad parts. While unit was disassembled we cleaned the parts which were to be reused and applied the new parts. The unit was then reassembled and reinstalled. The replacement of the gas valve required only a 1/2" wrench and screw driver, while the replacement of the ignitors required the use of an adjustable wrench. The ignitors are connected via spade connectors to an electrical device located in the electrical box at the lower center portion of the unit. Not a hard job but slightly time consuming.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Fan Switch Kit (Now subbed to Fan Switch Kit)

Part Number: PS2002868

No Longer Available

USE WPL 704504K (Now subbed to Gas Valve - Right Side)

Part Number: PS2076683

$80.83
In Stock

USE WPL 71002179 (Now subbed to Spark Igniter)

Part Number: PS2077638

$47.98
On Order

Glass Grease Collecting Jar (Now subbed to Drain Jar)

Part Number: PS2201823

$26.28
In Stock