Agitator didn't agitate

ApplianceRoper Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Socket set

Kenneth From Biddeford, AL

Feb 16, 2008

0 out of 1 people found this instruction helpful

Remove cap from inside agitator. Remove 7/16" bolt from deep inside agitator. You need a socket wrench with a long extension to reach this bolt. The agitator pulls straight up and off. The repair kit goes together as shown in the diagram. I broke off the plastic tabs as directed in the instructions using a pair of needle nose pliers, but I am not sure this step was even necessary. Assemble agitator in reverse order of removal, insert and tighten bolt using socket wrench. The new O-ring around agitator cap kept slipping off when I tried to push the cap in all the way, so I just dropped it in without pushing it down. I assumed gravity and the vibration of the agitator will seat the cap completely with time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Repair Kit

Part Number: PS334650

$17.87
In Stock