Replaced turntable motor

ApplianceGeneral Electric Microwave

ModelJVM1440

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Harold From Kewaskum, WI

Apr 01, 2013

out of people found this instruction helpful

Removed 5 screws from panel on bottom of microwave, lowered panel. Removed wires from old motor, removed 1 screwed one screw from motor, turned motor to the left slightly to remove motor from slot and removed old motor. Alligned new motor with "D" shaft on the turntable, turned motor to the right to get in the slot, re-installed the screw on other side of motor, re-installed the wiring harness, then closed the bottom panel and re-inserted the 5 screws and was done in less than 8 minutes. Real easy repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Motor

Part Number: PS237772

$39.45
In Stock