Water Dispenser would not dispense water in door

ApplianceWhirlpool Refrigerator

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Kenneth From Mineral, VA

Feb 15, 2008

1 out of 2 people found this instruction helpful

Removed plastic outer trim and punch pad by pulling out at bottom of trim and lifting up to remove from panel. Unstapped wire harness and layed punch pad aside. Removed two screws holding control bracket in place. Removed light wire first, then light bracket with pliers from control bracket. Removed two micro switches from old bracket and re-installed on new bracket. Re-installed light bracket and light wire to new control bracket. Place control bracket back in place with two screws. Plug wire harness back togather and re-snapped plastric trim and punch pad back in place. Job Complete

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Bracket

Part Number: PS327360

$8.76
In Stock