Nasty appearing pump seal

ApplianceMaytag Dishwasher


Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years


Jerry From Nevada City, CA

Mar 30, 2013

Unscrew round keeper on top of spray arm -CCW. Lift off spray arm. Remove the six Torx head screws aroun pump housing. Lift off pump housing. Unplug unit and obtain a small piece of 2 x 4 wood to block up the motor underneath. Push the white plastic lever near the left side of motor towards the back to loosen the entire unit. Place the wood block uner the motor and you will see the seal is accessable inside the dishwasher. Remove the seal and very carefully clean the area that accepts the new seal. Remove the block and pull back on the white plastic lever. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump Gasket

Part Number: PS2097779

In Stock