During spin cycle washer would shake and walk out of place

ApplianceMaytag Washer

ModelLAT8824AAE

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers

David L From Metamora, MI

Mar 29, 2013

Followed damper pad kit instructions, and advice of your other customers with the same problem. Although I also replaced the belts, but that was only because they were the original ones and did not contribute to the problem. I also ordered three new Centering Springs, but did not install them because the replacements were about 1/2" o 3/4" shorter than the originals. This would have made the job of reassembly more difficult. The high temp adhesive is a bit runny so make sure you wear some surgical type Latex gloves to protect your hands. Repair went well, and we hopefully good for another decade or so.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Damper Pad Kit

Part Number: PS2017036

$32.37
In Stock

Eyebolt Nut

Part Number: PS2018613

$3.83
In Stock

High Temperature Adhesive - 2oz.

Part Number: PS2196040

$12.33
In Stock