igniter would glow , but oven would not ignite

ApplianceGeneral Electric Oven

ModelJGB918SEK4SS

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Richard From CROWN POINT, IN

Mar 27, 2013

After receiving the part in the mail , opened oven door slightly and lifted it straight up , door came off easley , next removed the two screws at the back of the oven that holds the bottom cover , using a 1/4 " nut driver removed the old igniter ,pulling slightly out until the plug was accessible, squeeze the sides of the plug and disconnect, install new igniter and plug back in .replace cover and door . This repair only took 15min from start to finish .

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter Kit

Part Number: PS231280

$35.87
In Stock