Washer would not move to rinse cycle

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Wrench set

Peter From Lombard, IL

Mar 25, 2013

I removed the screws behind the top unit of the washer and flipped back the top to expose the wiring. I disconnected the wiring from the old lid switch. I tilted back the outer shell of the washer and moved it back off of the wash basin part. I removed the wiring from the harness along the underside of the shell and unscrewed the screws holding the broken switch in place. I installed the new switch in its place and ran the wiring through the harness. I put the shell back on the base and reattached the power clip. I closed the top unit and reattached the screws in the back and the washer was back and working.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock