No heat

ApplianceKenmore Dryer


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers

Richard From Eaton, OH

Feb 15, 2008

4 out of 5 people found this instruction helpful

The dryer stopped heating, it would only blow cold air. I removed the back panel and tested the thermal fuse with a DMM. The fuse was open, so it was bad and I needed a new one. I tested the thermostat and the DMM measured continuity across the terminals, so I thought it was good, bad assumption. I ordered a thermal fuse from PartsSelect and it came with a thermostat. Like a dummy, I only installed the fuse. The 1st time I ran the dryer the fuse blew again, because the thermostat was bad. So, moral of the story, install both parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thermal Cut-Off Kit

Part Number: PS334299

In Stock