Burners didn't work

ApplianceWhirlpool Range

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

John From Norfolk, MA

Feb 15, 2008

1 out of 4 people found this instruction helpful

Shut off power to the stove.
I removed the screw that held the block in place. Then I lifted the top of the rage to get to the wires. I cut the wires from the old block and stripped back the insulation. Next I put the heat shrinking sleeve on. I attached the new block with the wire nuts, pulled the sleeve down and used a hair dryer to shrink them. Then you just hook it back on screw it in and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Plug-In Block Kit

Part Number: PS340571

$9.80
In Stock

Surface Burner - 8" - 2600W

Part Number: PS382106

$31.28
In Stock