The blower wheel came apart and was rubbing on the housing.

ApplianceMaytag Dryer


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Mikal From Venice, FL

Mar 20, 2013

I unplugged the dryer. Lifted the top, removed the two screws to the front and popped the shut off switch out of it's clip. Then removed the housing front. Getting the old hub off was not that hard but getting the new one on was a pain. I filed the motor shaft to get the rust and any burrs off. Then I had to fit the new wheel to the shaft. I used my pocket knife to open the hole in the wheel. After I got the clamp and clip on reassembly went pretty quick. I hope this is enough detail.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Blower Wheel Clamp

Part Number: PS600181

In Stock

Retaining Ring

Part Number: PS2026490

In Stock

Blower Wheel

Part Number: PS2030883

In Stock