broken turntable coupler

ApplianceGeneral Electric Microwave


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers


Mar 15, 2013

Others said just push new coupler into hole where broken one was. This does not work. You have to take the underside of the micro to access the motor that drives the coupler. There is a screw holding the motor in. Take out screw and twist the motor to release it from holding slot. Then put coupler in hole and reattach motor. You may have to twist the motor to seat the coupler. Twist motor to replace in slot and then attach screw to hold motor in. Reattach under side. Fairly simple. Do not force the coupler into the hole without taking motor off first.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Turntable Coupler

Part Number: PS651211

In Stock