Dryer would not start

ApplianceAmana Dryer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Ray From Lehigh Acres, FL

Feb 13, 2008

4 out of 7 people found this instruction helpful

Remove bottom panel from dryer. disconnect wires off of Limit switch. Unscrew 2 screws, remove old switch. Reverse to install. Important, if limit goes bad you need to replace cycling thermostat or chances are the limit will go out again. (Limit on back wall of dryer). The cycling thermostat is right under the lint screen. Remove 3 wires. Remove 2 screws, remove switch. Reverse to install new cycling thermostat. Toatl cost of 2 parts used 16 dollars and change. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cycling Thermostat (Now subbed to Cycling Thermostat)

Part Number: PS2046273

$20.49
In Stock

High Limit Thermostat (Now subbed to Limit Thermostat)

Part Number: PS2177455

$23.59
In Stock