The locing tab of my lower fill injector broke off

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers
Socket set
Wrench set

Eric From Brooklyn, NY

Mar 07, 2013

First I took out the back plate of the control panel on the top of the washer. There were 3 Philips head screws on the top and 2 either 1/4 inch or 5/16 screws on the bottom. once the back panel was open it was all a matter a finding the screw that held the lower fill injector in place and unscrewing it since the tab on the other side had already broken off. When replacing the new lower fill injector I suggest moving the wash basin as far back as possible to get enough working space under the control panel. the tab on the right side might be a little tight going in but as long as you can get it so that the screw will fit on the other side it will hold.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lower Fill Injector

Part Number: PS2019426

In Stock