Washer would start, then stop for no apparent reason

ApplianceMaytag Washer / Dryer Combo


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

James From Scotts Valley, CA

Mar 01, 2013

The Neptune's machine control board will stop the machine if it detects problems. Unfortunately you never know WHAT problem it detects! Could be the door switch, slow water fill-up, motor control, or in my case, the main timer switch. Replacing the switch was easy, two screws to remove the panel under the controls, then a torx bit to remove the control panel itself. One more screw holding the timer to the panel. Total replacement time was about 5 minutes and it has fixed the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2020347

In Stock