very loud screeching noise when washer was rinsing/ spinning

ApplianceAmana Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers

SANDRA From PASADENA, TX

Feb 25, 2013

remove small panel on backside of washer, 3 screws. removed both intake and out take hoses on pump, clamps only. removed screws holding pump in place,2 i think. removed old pump replaced with new pump.attached both intake and outtake hoses with same clamps.Finished with pump installment. removed old belt by loosening the motor pully and slipping the belt off. placed new belt on pully and drum mechanism. tightened the belt to proper tension. ran a short cycle to ensure working condition then replace back panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Belt

Part Number: PS2018741

$14.21
In Stock

Drain Pump

Part Number: PS2347193

$64.81
In Stock