belt and water pump

ApplianceGeneral Electric Washer

ModelWJSR2080v1WW

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set
Wrench(Adjustable)

Christopher From Red Bank, NJ

Feb 23, 2013

Belt had worn and was shredding and melting due to pump not draining tub. Too bad my wife and daughters couldn't tell me the pump wasn't working right any sooner. The belts slow disintigration over time made a black, gooey mess inside the machine. Worked on the machine in place and only removed front. Old belt removal was easy with screwdriver prying around motor pulley but replacement was challenging in the tight space under the machine. It did go on by working-rotating belt around back of agitator pulley. By far the hardest part of the job. Replacing pump was easy enough but made a water mess and had to adjust clamps for leaks. Machine is now good to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

V-Style Drive Belt

Part Number: PS270803

$6.63
In Stock

Retaining Clip for Clutch

Part Number: PS271104

$1.59
In Stock

Pump and Motor Assembly (Now subbed to PUMP)

Part Number: PS8768445

$53.39
In Stock