Plastic Broken on icemaker auger

ApplianceGeneral Electric Refrigerator


Level of DifficultyDifficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Don From Pearland, TX

Feb 18, 2013

The repair was hard because the nut holding the auger to the icemaker was reverse thread. If you tried to get it off the normal way, you just continued to tighten it up and therefore the assembly wouldn't come apart. Once I figured that out there was a number of screws that held the housing to the icemaker that had to be removed. Putting it all back together was reasonably straightforward. Put the assembly back into the refrigerator and it started making ice cubes in about an hour.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Auger

Part Number: PS1018130

In Stock