Washer was very noisey on the agitation cycle.

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

William From Winnfield, LA

Feb 17, 2013

You'll be working on the very bottom of the washer. Remove the Phillips-head screw on the bottom, center pulley, then remove the washer and serrated pulley stop. Turn the pulley to unthread it from the shaft. The brake rotor bearing will be on top of the pulley. Remove it by hand (not a press fit) and reinstall the new bearing in the same orientation. Thread the pulley back onto the shaft to the original depth. Reinstall the serrated pulley stop, washer and screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Brake Rotor Bearing

Part Number: PS2016361

In Stock

Drain Pump

Part Number: PS2347234

In Stock