TURN TABLE MOTOR WOULD NOT WORK

ApplianceMaytag Microwave

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

ROBERT From ROSSVILLE, GA

Feb 17, 2013

TAKING OFF THE BOTTOM TRAY THAT COVERS THE LOCATION OF THE DRIVE MOTOR WAS VERY EASY ONLY 4 SCREWS IN FRONT OF UNIT. THIS OVEN HAD 2 LIGHTS SO HAD TO DISCONACT BOTH LIGHTS AS WELL AS THE DRIVE MOTOR. I DID NOT MOVE OUT THE STOVE THIS WOULD HAVE MADE THE JOB EASIER. ONCE I REMOVED THE BAD MOTOR YOU HAD TO BE A CONTORTIONEST TO TRY AND HOLD THE NEW MOTOR IN PLACE AND TRY TO LINE UP THE SCREWS. I WOULD HIGHLY RECOMMEND THAT YOU USE A MAGNETIC SCREWDRIVER. IF I HAD ONE THE JOB WOULD HAVE BEEN COMPLETED IN HALF THE TIME. IT WORKS GREAT.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Turntable Drive Motor

Part Number: PS2055102

$47.41
In Stock