Dishwasher no start. Constant flashing "Normal" and "Cancel" lights.

ApplianceKitchenAid Dishwasher


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

David From Madison, AL

Feb 15, 2013

Initially replaced the Electronic Control Board, based on similar problems and solution found on this web-site. Did not solve my problem. Determined "Normal" front panel switch did not have a solid click or detent feel when depressed,as compared to the other panel switches, so switched off power at circuit breaker and replaced front "Control Panel Assembly". Removed top 6 Torx screws holding Panel onto door.Pulled Panel from door.Unplugged ribbon cable only from Elect Cont Bd. Lifted Bd from Panel, while gently bending 2 plastic retainers on left side. Lifted door handle assembly from Panel. Old Panel is free from door. Installed new Panel following reverse procedure. Applied power and dishwasher works fine now. I was impressed with the Parts Select 2 day delivery.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel Assembly - Black

Part Number: PS393302

In Stock