uneven heating/ high heat broiler to no heat

ApplianceJenn-Air Range


Level of DifficultyDifficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers

Jack From Houston, TX

Jul 23, 2007

3 out of 3 people found this instruction helpful

After replacing heating element then selector switch, I came to think the only other thing was the thermostat. It finally worked...but not without some tribulations. This note is for a repair involving thermostat for a w130 Jenn-air or Maytag wall oven, DO NOT FOLLOW INSTRUCTIONS INCLUDED WITH REPLACEMENT PART! It says the BR and BA terminals are to be reversed with this replacement part...not so! After re-connecting (as per instructions) NOTHING WORKED! If you have this model Jennair or Maytag, my suggestion is to replace the wires to connections just as they were removed from the old one. I finally did this after much frustration and electrical testing with a multimeter. Hope this note helps someone. Good Luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS1492650

No Longer Available