No spark on the rt rear burner. I could close the gap to the igniter and then get ignition.

ApplianceJenn-Air Range

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers

Carlisle From Hampstead, NC

Jan 29, 2013

I thought it was probably a bad ground due to corrosion on the igniter from spilled stuff over the years. I replaced the igniter and the burner. It did not work. I pulled out the multimeter to check for ground. It seems to be ok except at the bottom of the burner where it is supposed to be. Took it all apart and reassembled. Same thing. So, I swapped the dual burner assemblies around (right to left and left to right side). Bingo, both front & back, both sides worked. I still think there was a grounding issue. But all is good now. This project should have taken 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Top Burner Igniter

Part Number: PS2082000

$15.25
In Stock

Burner Head

Part Number: PS2356982

$34.27
In Stock