Level of DifficultyA Bit Difficult
Time to do repair15 - 30 mins
Age of ApplianceMore than 10 years
Tom From Franklin, WI
Jul 23, 2007
94 out of 100 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
|Part Photo||Part Description||Price||Availability
Part Number: PS395284