Wheel & Mount Assembly had broken wheel allowing upper dishrack to hang crooked and not pull out properly

ApplianceWhirlpool Dishwasher

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Socket set

Scott From Centralia, IL

Jan 23, 2013

out of people found this instruction helpful

Removed plastic end caps from dish rack rail and slid rack off front of rail. Removed rear broken wheel and mount assemble that rail runs on. I believe this took a 3/16" socket which most people would not have and would prevent them from removing this part. With the right tool it was easy, without the tool it would be impossible. Buying tool at local hardware store would be much cheaper than calling repair man. After rear wheel mount assembly was removed, I slid rail forward so I could easily remove the rear rail end cap. I then mounted new wheel mount assemble using original screws and then slid rail through both wheel assemblies and snapped rail rear end cap back into rail. I then slid the upper dish rack on to the rails on both side, slid the wrack back and then snapped the end caps back into the rails fronts on bothe sides. The job was done and the dishwasher was ready for service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Wheel & Mount Assembly

Part Number: PS1488042

$4.46
In Stock