244050-1-M-GE-WB30X356 -Tilt Lock Hinge Mounted Surface Unit - 6"
Part Location Diagram of WB30X356 GE Tilt Lock Hinge Mounted Surface Unit - 6
See part 120 in the diagram
( Grid squares measure 1x1 inch )
244050-1-S-GE-WB30X356 -Tilt Lock Hinge Mounted Surface Unit - 6" 244050-2-S-GE-WB30X356 -Tilt Lock Hinge Mounted Surface Unit - 6" 244050-3-S-GE-WB30X356 -Tilt Lock Hinge Mounted Surface Unit - 6" Part Location Diagram of WB30X356 GE Tilt Lock Hinge Mounted Surface Unit - 6
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Tilt Lock Hinge Mounted Surface Unit - 6" WB30X356

Rated by 6 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 79.14
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS244050
Manufacturer Part Number WB30X356
Manufactured by GE
Product Description

Tilt Lock Hinge Mounted Surface Unit - 6" Specifications

This kit does NOT include the drip bowl. This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element. These standard low rise elements have an attached trim ring, and a terminal block with all three-wire units.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB30X356 replaces these:
AP2634798, 2566, AP5, WB30X0137, WB30X0138, WB30X0141, WB30X0142, WB30X0201, WB30X0202, WB30X0222, WB30X0300, WB30X0301, WB30X0304, WB30X0305, WB30X0318, WB30X0319, WB30X0355, WB30X0356, WB30X128, WB30X137 , WB30X138, WB30X141, WB30X142, WB30X201, WB30X202, WB30X222, WB30X300, WB30X301, WB30X304, WB30X305, WB30X318, WB30X319, WB30X355, WB30X356R, WB30X5006, WB30X5007, WB30X5008, WB30X5009, WB30X5016, WB30X5017 Show less
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced old burners
Both the eight inch burner and the the six inch burner were not an exact fit. I used the old rings and the new burners. The eight inch burner fit well with the new drip bowl;however, the six inch burner did not fit with the six inch drip bowl and I had to grind off about an eigth inch from the diamiter of the drip bowl. I replaced most all the wiriing and after I get the lower oven element rebuilt it will be ready for a test drive ..can't wait!
Read less
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Tilt Lock Hinge Mounted Surface Unit - 6" Tilt-Lock Hinge-Mounted Surface Burner - 8"
  • Terry from Ulen, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
elements were burned out
Removed the elements from the stove and disconnected the wires. Reconnected wires to the new elements and reinstalled in the stove. I was very impressed with the delivery time. I ordered online at 3:00 PM and the parts were at my door at 9:00 AM the next morning. Greatest service I ever had from anyone! I am 250 miles from the warehouse.
Read less
  • Ronald from Cape May Court House, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change element and two burners
It was pretty easy. I just had to remove two screws, remove old element, connect new element and put screws back on. For the burners all you had to do was disconnect old one and reconnect new ones. The parts even included new ceramic covers for the wires.
Other Parts Used:
Bake Element Tilt Lock Hinge Mounted Surface Unit - 6" Tilt-Lock Hinge-Mounted Surface Burner - 8"
  • Jason from Taylors, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
6" element burnt out
Finding a replacement element for a 30 year old GE electric stove was difficult to find. I was overjoyed when I found a replacement on Partselect! It was a simple "Unscrew, reattach wires and install" all in about 10 - 15 minutes all with a nutdriver. Plug in elements are common but to find one with screw connections is not easy, THANK YOU PARTSELECT! A $48.00 investment (Element with trim ring) was worth the cost compared to a $1,400.00 replacement. You just made a loyal customer, again, Thank You.

Lenny
Nazareth, PA
Read less
  • Leonard from Easton, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Find, Order, Receive & Replace electric stove burners
Teh instillation was a simple matter of removing the old burners and replacing them with the new ones. Removal required the screw connector on each burner ring to be loosened and the reverse done when the new one was installed. The hardest part was finding the correct burners since the Model number of the stove was not in anyones file. This web site provided adequate pictures of the part to permit identification of the likely part to order. Thanks.
Read less
Other Parts Used:
Tilt Lock Hinge Mounted Surface Unit - 6" Tilt-Lock Hinge-Mounted Surface Burner - 8"
  • Harry from Catawissa, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner had shorted out
It was so easy. I turned off the power to the range, loosened the hinge screw and removed the burner unit from the stovetop. Next I removed the two spring clips holding the ceramic housing covering the three connectors. Then I loosened the three screws holding the 3 wire connectors to the burner, reconnected the 3 wires to the new burner unit, positioned the ceramic insulator housing and reinstalled the spring clips and finally replaced and tightened the hinge screw. It took about 5 or six minutes, max.
You can do this!
Read less
  • John from Granite City, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Margie
November 26, 2018
Does this come with the ceramic wire insulator?
PartSelect logo
Hello Margie, Thank you for the question. Yes, the kit comes with the Ceramic terminal block. Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Tilt-Lock Hinge-Mounted Surface Burner - 8"
$116.89
$116.89
  In Stock
Drip Bowl - 6 Inch
$11.33
$11.33
  In Stock
Drip Bowl - 8 Inch
$17.90
$17.90
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244050
Manufacturer Part Number: WB30X356
Brand
Model Number
Description
Hotpoint
107RC36B
Range - Hotpoint Range/Stove/Oven Model 107RC36B Parts
Hotpoint
107RC75A
Range - Hotpoint Range/Stove/Oven Model 107RC75A Parts
Hotpoint
107RC85A
Range - Hotpoint Range/Stove/Oven Model 107RC85A Parts
Hotpoint
107RF38-E
Range - Hotpoint Range/Stove/Oven Model 107RF38-E (107RF38E, 107RF38 E) Parts
Hotpoint
107RH971E
Range - Hotpoint Range/Stove/Oven Model 107RH971E Parts
General Electric
108RA220E
Range - GE Range/Stove/Oven Model 108RA220E Parts
General Electric
108RS40J
Range - GE Range/Stove/Oven Model 108RS40J Parts
Hotpoint
109RB55
Range - Hotpoint Range/Stove/Oven Model 109RB55 Parts
Hotpoint
109RD23
Range - Hotpoint Range/Stove/Oven Model 109RD23 Parts
General Electric
1J2442M2
Range - GE Range/Stove/Oven Model 1J2442M2 Parts
General Electric
1J2442M3
Range - GE Range/Stove/Oven Model 1J2442M3 Parts
General Electric
1J245W1N1
Range - GE Range/Stove/Oven Model 1J245W1N1 Parts
General Electric
1J4021M2
Range - GE Range/Stove/Oven Model 1J4021M2 Parts
General Electric
1J4021M3
Range - GE Range/Stove/Oven Model 1J4021M3 Parts
General Electric
1J4021M4
Range - GE Range/Stove/Oven Model 1J4021M4 Parts
General Electric
1J4081N1
Range - GE Range/Stove/Oven Model 1J4081N1 Parts
General Electric
1J4081N2
Range - GE Range/Stove/Oven Model 1J4081N2 Parts
General Electric
1J4081N3
Range - GE Range/Stove/Oven Model 1J4081N3 Parts
Hotpoint
209RD23
Range - Hotpoint Range/Stove/Oven Model 209RD23 Parts
Hotpoint
407RF21
Range - Hotpoint Range/Stove/Oven Model 407RF21 Parts
Hotpoint
407RF25
Range - Hotpoint Range/Stove/Oven Model 407RF25 Parts
Hotpoint
407RF41
Range - Hotpoint Range/Stove/Oven Model 407RF41 Parts
General Electric
J235*04
Range - GE Range/Stove/Oven Model J235*04 Parts
General Electric
J235*05
Range - GE Range/Stove/Oven Model J235*05 Parts
General Electric
J235*06
Range - GE Range/Stove/Oven Model J235*06 Parts
General Electric
J235*07
Range - GE Range/Stove/Oven Model J235*07 Parts
General Electric
J235*08
Range - GE Range/Stove/Oven Model J235*08 Parts
General Electric
J237*04
Range - GE Range/Stove/Oven Model J237*04 Parts
General Electric
J237*05
Range - GE Range/Stove/Oven Model J237*05 Parts
General Electric
J237*06
Range - GE Range/Stove/Oven Model J237*06 Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Tilt Lock Hinge Mounted Surface Unit - 6"
$ 79.14
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.