Icemaker supply solenoid did not shut off water flow completely.

ApplianceAmana Refrigerator

ModelSQD25N2W

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver

Jim From Gainesville, TX

Feb 06, 2008

1 out of 7 people found this instruction helpful

After turning off the internal freezer and refrigerator control knobs, I disconnected the power cord. I then removed the lower back cover, the two hex screws holding the inlet valve bracket to the refrigerator frame, disconnected the incoming water line and the two plastic plastic water lines (going to the drinking water spigot and ice maker).
I next marked the two quick-disconnect wiring plugs (for reference on re-assembly). The whole unit came out very easy. I then installed the old mounting bracket on the new water inlet valve, and did reverse installation. Piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Maker Water Inlet Valve (Now subbed to Water Inlet Valve)

Part Number: PS2377030

$63.21
In Stock